Hello - Hoping someone can provide a little guidance.

Approx. 2-3 weeks ago had the Chigoe AIO6 MAX installed on my 2025 R1300 GS. There's no BMW Nav cradle, just the AIO6 connected via the Quick Release Module and the CGRC CAN. The device is powered via the DWA Module (Alarm Port).

The Chigee works fine, however in that time frame my Lithium Ion battery (3 month old bike) has died putting the bike and battery in safe mode requiring a tow to the dealer. After getting the bike operational again and charging at home I noticed that when the bike is completely powered down, the CGRC CAN constantly flashes blue and does not stop blinking, even after complete power down of bike and 60-90 seconds as I believe the CGRC CAN should do. CGRC does go solid blue on power up of bike.

1. I'm thinking that the CGRC CAN is continuing to draw power off the battery, drawing it down enough to place the bike in safe mode.

2. I'm pretty sure (correct me if I'm wrong), that the CGRC CAN should completely power down with the bike.

Any suggestions on t-shooting this issue?

Thanks!