Installation
Avoid Connecting ACC Wire to the 3-Pin
We do not recommend connecting the ACC Wire to the 3-Pin Navigation Interface, as it may cause problems with the entire motorcycle circuit if the ACC encounters any problems. For a safer and more reliable installation, we recommend connecting the ACC ...
How to Connect the Yellow Cable Without a Fuse Box?
If your motorcycle lacks a fuse box, you can connect the yellow cable to the tail light wiring harness instead. The tail light wiring is typically located inside the rear fender, under the seat, or near the tail light assembly. To access the tail ...
Can AIO-5 Play be installed on my bike?
The AIO-5 Play can be installed on the majority of motorcycles. However, please ensure the following common considerations before making a purchase: 1、Cable Length Check if the power cable are long enough. length of Power cable:220cm 2、Bracket ...
How do I locate the ACC wire?
Start by finding the fuse box, then use a multimeter to identify the ACC wire. Set your multimeter to the DC voltage setting. Connect the black meter lead to the battery negative terminal. Use the red meter lead to probe the various wires. The ACC ...
Can I use HexEzCan to power the device instead of directly connecting to the battery?
Yes, you can. Just make sure to set the amplifier to the same fuse as on the AIO-5 Lite cable. You don't need to set anything on the AIO-5 Lite, just on the HexEzCan. If you're unsure about anything, please contact HexEzCan.
Why does the AIO-5 Device Shut Down Slowly on BMW?
The slow shutdown on BMW motorcycles is due to the inherent delay in ACC power-off of BMW motorcycles, which typically takes about one minute to power off. This delay is not related to the ACC of the AIO-5 lite / Play. It's a known behavior unique to ...
Is it okay to install it together with ETC or USB power supply?
There is no problem as long as the operating current of this device is 12V to 18V and the operating voltage is 0.6A.
Can It Be Powered by a Power Bank?
For AIO-5 Lite: No. Please connect to the motorcycle's DC12-18V. For AIO-5 Play: Yes. How to Power AIO-5 Play?
Does AIO-5 drain the bike battery?
The AIO-5 Lite / Play are equipped with low voltage battery protection. Once it detects low voltage(drops below 12 volts), the device will shut down completely, ensuring it does not consume any more power from the battery. Therefore, it will not ...
Can I install the host on a RAM ball mount?
The standard ball head included with the product has a diameter of Φ17mm. If you wish to mount the device on a 1" (25.4mm) mounting bracket or arm, please purchase the 1" RAM Ball Head accessory and replace the standard ball head with it. Dimensions ...
Can AIO-5 Lite be installed on my bike?
The AIO-5 Lite can be installed on the majority of motorcycles. However, please ensure the following common considerations before making a purchase: 1、Cable Length Check if the cables for the front and rear cameras are long enough. The total cable ...
What are the dimensions of the host?
For detailed information about the monitor size, please refer to the attached images.
How to choose the mount?
The package comes with a handlebar mount designed for 22-32mm diameter tubes, suitable for the majority of motorcycles. To ensure proper installation, check out our installation video by clicking here. Additional Mount Options: We offer a variety of ...
What is its Continuous Power Consumption?
Power specifications of AIO-5 lite are as follows (12V Battery): Standby Current: 100uA (0.0012W) Recording Start Current: 0.6A (7.2W) AIO-5 lite features low-voltage battery protection. When the battery voltage drops below 12 volts, the device will ...
How far can I place my smartphone? Can I store it in the rear trunk or seat bag?
The effective range is within a 5m radius around the device. Since it operates using radio waves, avoid placing it in areas that obstruct radio signals, such as metal boxes, when storing.
What is the size of ball head component?
The standard ball head included with the package has a diameter of Φ17mm. If you wish to mount the device on a 1" (25.4mm) mounting bracket or arm, please purchase the 1" RAM Ball Head accessory and replace the standard ball head with it.
Is the main unit removable?
AIO-5 Lite No, the main unit is not removable. We employ anti-theft bolts on key mounting screws. Additionally, the wiring is designed to be routed into the interior of the bike (power source), making it more challenging to detach easily. AIO-5 Play ...