Can I Use CGRC CAN and Denali Cansmart Together?

Can I Use CGRC CAN and Denali Cansmart Together?

Yes, you can use the CGRC CAN and Denali CanSmart together. Simply connect them in a series as follows:

OEM Connector → Chigee CGRC CAN → Denali CanSmart Controller → RDC/DWA Module Connector

All you need to do is connect the interfaces in the mentioned sequence to establish the connection.

    • Related Articles

    • Introduction to CGRC CAN

      The Chigee CGRC CAN remote controller works by tapping into your bike's CAN-bus, analyzing the signals from the switches, and translating them into commands to control the AIO-5 Lite. Please note that the Chigee CGRC CAN is specifically designed to ...

    • Install CGRC Remote Control CAN

      During setup, all you need to do is plug the CGRC CAN into one of two module interfaces: either the 4-pin port for the RDC module, which handles tire pressure monitoring, or the 8-pin port for the DWA module, which is the bike's anti-theft alarm ...

    • Can CGRC CAN support vertical scrolling?

      While the scroll wheel allows side-to-side operation, it does not support vertical scrolling. Please note that this is not a product defect as the CGRC CAN does not have a vertical scrolling feature. To better understand how to operate the CGRC CAN, ...

    • Can CGRC CAN be Daisy-Chained?(e.g. Hex ezcan)

      Yes, CGRC CAN supports daisy-chaining ezCAN: Remove the male connector from the DWA (the stock plugs into the DWA on the bike) attached to the ezCAN, and fit the Chigee connectors between them (female Chigee to bike's male and male Chigee to ezCAN ...

    • Can CGRC CAN Zoom In and Out on Maps?

      Yes, it can. You need to use the scroll wheel within the map app and move it to the zoom control area on the map. To enlarge, toggle to the + sign and press the button. To reduce, toggle to the - sign and press the button.