CGRC CAN Module Not Lighting Up

CGRC CAN Module Not Lighting Up

If your CGRC CAN module is not lighting up after installation, please try the following steps:

1. Verify Correct Installation:

Ensure that CGRC CAN module is installed in the correct position. If you are unsure, please contact CHIGEE SUPPORT for further assistance.

2. Activate the Module:

The CGRC CAN module is designed to activate upon detecting vibrations. Start your engine and check if the module lights up. Toggle the knob left and right to see if the status light flashes green or blue.

3. Reconnect the Module:

Disconnect and then reconnect the module’s interface to ensure a secure connection.

4.Check for RDC/DWA Module or Hardware Issues:

Try installing the CGRC CAN on another motorcycle's RDC/DWA module. If it lights up on the other motorcycle, then your motorcycle's RDC/DWA module may be faulty. If it still doesn't light up, then the CGRC CAN module itself might be defective.

If the above steps do not resolve the issue, please take clear photos of the cable connections and the module's placement and send them to Chigee Technical Support for further assistance.

    • Related Articles

    • Compatibility of Chigee Display with BMW Cradle(AIO-5 Play BMW & AIO-6)

      Chigee offers two products that can be powered directly through the BMW Nav Prep 5/6 or the BMW ConnectedRide Electric Keyless Mount. Depending on your BMW motorcycle’s model and year, the Chigee Display can: Receive power directly from the cradle ...

    • BMW Tire Pressure Data Integration with Chigee Display

      Supported Scenarios Chigee Displays can directly access your BMW’s built-in Tire Pressure Monitoring System (TPMS) through the BMW 3-pin navigation connector in the following setups: AIO-5 Play for BMW plugged directly into BMW Nav Prep AIO-6 with ...

    • Why the Chigee Display Shows Only Even Speed Values on BMW Nav Prep

      The AIO-5 Play For BMW and the AIO-6 with BMW Quick Release Module rely on the BMW Nav Prep cradle to provide both power and vehicle data. Why Only Even Numbers? BMW Nav Prep outputs speed data in a format where the values must be doubled to reflect ...

    • BMW R1250ADV

      Installing the AIO-5 Lite on BMW R1250ADV using the MFP0022 Crossbar Mount.

    • BMW 1200RS

      Installing the AIO-5 Lite on BMW 1200RS using the standard bracket provided.