CGRC LIN / CAN Module Light Stays On After Motorcycle Shutdown

CGRC LIN / CAN Module Light Stays On After Motorcycle Shutdown

The CGRC LIN and CGRC CAN modules are designed with power-saving behavior to protect your motorcycle’s battery.

Normal Operation

  • When you turn off the motorcycle key and the battery is disconnected, the module will no longer receive continuous power.
  • The module is vibration-activated — it only powers on after the motorcycle is started and detects movement.
  • Typically, within 1–2 minutes after shutting down the motorcycle, the module’s indicator light will turn off automatically.

Important Note

If the indicator light stays on continuously after shutdown:

  • The module will continue to draw a small amount of power from your motorcycle battery.
  • Although the power consumption is minimal, leaving it like this for an extended period may eventually drain the motorcycle battery.

What to Do If This Happens

  1. Immediately unplug the module from your motorcycle.
  2. Take a photo of the back of the module.
  3. Send the photo to Chigee Support.

Our team will verify the issue. If it is confirmed as a module fault, we will arrange to send you a replacement unit.

    • Related Articles

    • CGRC LIN / CGRC CAN Not Working

      If your CGRC LIN or CGRC CAN module is not functioning as expected, please follow the steps below to diagnose the issue. Step 1: Understand How the Module Works The module is vibration-activated — it only receives power after the motorcycle is ...

    • CGRC CAN Module Not Lighting Up

      If your CGRC CAN module is not lighting up after installation, please try the following steps: 1. Verify Correct Installation: Ensure that CGRC CAN module is installed in the correct position. If you are unsure, please contact CHIGEE SUPPORT for ...

    • Is the CGRC LIN compatible with my BMW?

      Transform your CHIGEE into a powerful data hub with the CGRC LIN. Gain access to your BMW's original data and enjoy enhanced control through the Wonder Wheel. Note: CGRC LIN requires direct insertion into the 3-pin BMW Navigation Interface. Locate ...

    • Will I Lose Control of the BMW TFT After Installing CGRC CAN or CGRC LIN?

      No. Installing the CGRC CAN or CGRC LIN module on your BMW motorcycle does not cause you to lose control of the BMW TFT. Once the module is connected to your BMW interface, you can use the BMW WonderWheel to control both the Chigee Display and the ...

    • CGRC CAN vs. CGRC LIN: For BMW Motorcycles

      The CGRC CAN and CGRC LIN modules are developed by Chigee to integrate BMW motorcycles with the Chigee Display. By connecting these modules to the BMW interface, riders can enable WonderWheel control or data reading. Installation CGRC CAN Supports ...