How to adjust view angel of AIO-5 lite after install ?
Even after installation, you can fine-tune the camera's perspective by loosening the lens screws. If you need to adjust display angle of the main unit, simply loosen the bracket screws for quick adjustments.
Related Articles
Install AIO-5 Lite / AIO-5 Play
We have created an instructional video detailing the installation process. Please enable English subtitles for step-by-step instructions. Additionally, you have the option to use automatic translation for convenience. To enhance your experience with ...
Install CGRC Remote Control CAN
During setup, all you need to do is plug the CGRC CAN into one of two module interfaces: either the 4-pin port for the RDC module, which handles tire pressure monitoring, or the 8-pin port for the DWA module, which is the bike's anti-theft alarm ...
Install Handlebar Mount(AIO-5 Included)
Suitable for 22-32mm pipe diameter
AIO-5 Lite Does Not Powering On
We recommend trying to power the AIO-5 unit via the USB Type-C port (located at the bottom of the device, next to the SD card slot) to see if it can start normally. 1. Please ensure that you use a power supply with a voltage greater than 5V and a ...
Install MFP0022 Crossbar Mount
Click below link to know more info. https://www.chigee.com/collections/accessories/products/mfp0022