Lock Footage to Prevent Overwriting
Yes, you can manually lock videos — but only on CHIGEE Display models that include a camera, such as AIO-5 Lite, XR-2, XR-3, and AIO-6.
To lock a video:
-
On the CHIGEE Display home screen, tap “Video” to enter the recording interface.
-
Tap the screen once to bring up the menu.
-
Tap the fourth button from the left, labeled “Lock”, to protect the current footage from being overwritten.
Please refer to the screenshot provided for visual guidance.
Related Articles
Screen Lock for Chigee Display
AIO-6 Press and hold the rightmost button (Screen Lock Button) for approximately 3 seconds until you find the prompt “Screen Locked”, then release the button. ⚠️ Please do not hold too long, or the device will restart. AIO-5 Lite Long-press the ...
Dashcam Keeps “Locking” While Riding (Beep/Camera Sound + Lock Icon)
If your CHIGEE display keeps beeping like a camera and shows a lock icon during rides, the G-Sensor (Collision Lock) is being triggered repeatedly by bumps. Lower the vibration/impact sensitivity or turn it Off to stop constant lock events. Applies ...
AIO-5 Lite Black Screen Recovery(Backlight On, But Won’t Boot)
If your AIO-5 Lite shows a backlight when powered on but fails to fully start up, the issue is most likely due to a failed firmware update. In such cases, the system enters a recovery state and cannot complete the boot process. To resolve this issue, ...
Can AIO-5 Lite be installed on my bike?
The AIO-5 Lite can be installed on the majority of motorcycles. However, please ensure the following common considerations before making a purchase: 1、Cable Length Check if the cables for the front and rear cameras are long enough. The total cable ...
Data Overlays on Dashcam Footage — GPS vs Motorcycle Data
Applies to: All CHIGEE Displays with a dashcam (e.g., AIO-6 with camera, AIO-5 Lite). Goal: Understand which data the display provides by itself vs. what can be read from the motorcycle to overlay on exported videos in CHIGEE GO. 1) Built-in Device ...