OBD Data Freeze on the CHIGEE Display

OBD Data Freeze on the CHIGEE Display

Understanding the Issue

If you notice that OBD data freezes or stops updating on your CHIGEE Display, it may be due to limitations in your motorcycle’s OBD protocol, not a fault with the device itself.

Designed for Short-Term Diagnostics

Some motorcycle brands and models use OBD interfaces that are intended only for short-term diagnostic use, not for continuous real-time data transmission.
For example, BMW motorcycles can initially transmit data via the OBD port, but the connection is not stable over extended periods. This is by design and not a technical malfunction.

Observable Symptoms

  • OBD data (such as RPM, speed, or temperature) freezes or lags after a while of riding
  • The display may stop updating dynamic information
  • Phone mirroring still working

This typically happens because the OBD protocol does not support continuous data streaming. Most real-time data points are time-limited or restricted by the ECU.

Known Affected Models

  • All BMW motorcycle models
  • Other motorcycle brands and models may also be affected due to similar ECU design constraints

What You Can Do

Unfortunately, CHIGEE cannot override manufacturer-imposed limitations on OBD data output.
We recommend contacting your motorcycle’s manufacturer to confirm whether continuous OBD data transmission is supported for your specific model.

    • Related Articles

    • OBD Module Suddenly Stops Reading Data

      If your OBD module was previously working but suddenly stops displaying data on the CHIGEE Display — especially after your motorcycle has been parked for a while or has experienced a fault — there are a few key steps to check. Step 1: Confirm OBD ...

    • BMW Native TPMS Data Not Showing on CHIGEE Display

      Applies to: AIO-5 Play for BMW plugged directly into BMW Nav Prep AIO-6 with BMW Quick-Release Module plugged into BMW Nav Prep If your CHIGEE Display isn’t showing TPMS data, follow the steps below: 1. Check Physical Connections Start by ensuring ...

    • BMW Tire Pressure Data Integration with Chigee Display

      Supported Scenarios Chigee Displays can directly access your BMW’s built-in Tire Pressure Monitoring System (TPMS) through the BMW 3-pin navigation connector in the following setups: AIO-5 Play for BMW plugged directly into BMW Nav Prep AIO-6 with ...

    • Using the CHIGEE OBD Module: Requirements & Supported Bikes

      Your motorcycle ECU outputs data on the OBD port. The CHIGEE OBD module reads that data and sends it to the CHIGEE Display for live RPM, speed, temps, MAP, etc. Connection rule (non-negotiable): Direct plug-in only. No splitters, no parallel devices, ...

    • Data Overlays on Dashcam Footage — GPS vs Motorcycle Data

      Applies to: All CHIGEE Displays with a dashcam (e.g., AIO-6 with camera, AIO-5 Lite). Goal: Understand which data the display provides by itself vs. what can be read from the motorcycle to overlay on exported videos in CHIGEE GO. 1) Built-in Device ...