What is its Continuous Power Consumption?

• Related Articles

• Introduction to Wiring and Power Connection

  When adding AIO-5 lite to your bike, you'll be working with three main wires - red, yellow, and black. Here's what you need to know: The red wire connects to the positive terminal of the battery. The black wire goes to the negative battery terminal. ...

• Is it okay to install it together with ETC or USB power supply?

  There is no problem as long as the operating current of this device is 12V to 18V and the operating voltage is 0.6A.

• Can I use HexEzCan to power the device instead of directly connecting to the battery?

  Yes, you can. Just make sure to set the amplifier to the same fuse as on the AIO-5 Lite cable. You don't need to set anything on the AIO-5 Lite, just on the HexEzCan. If you're unsure about anything, please contact HexEzCan.

• What's the purpose C-type USB port?

  Before installing the main unit on your bike, you can power the AIO-5 lite via USB port using a computer or a mobile power source to complete the initial setup. However, please note that powering the device via USB may result in insufficient voltage ...

• Why does the AIO-5 lite Device Shut Down Slowly on BMW?

  The slow shutdown on BMW motorcycles is due to the inherent delay in ACC power-off of BMW motorcycles, which typically takes about one minute to power off. This delay is not related to the ACC of the AIO-5 lite. It's a known behavior unique to BMW ...