Choose a crossbar clamp for the diameter of your horizontal crossbar: 12–16 mm or 22 mm. Do not choose by the motorcycle model name alone.
Prepare and install
You need the matching clamp kit, its installation tools and a compatible display attachment. Both clamp sizes support the AIO-6 CG Quick-Release Module. Check the actual mounting interface for other setups.
Measure the crossbar diameter and choose the matching clamp.
Check a position that leaves the original instruments visible and allows full steering and windshield movement.
Fit the clamp and display attachment following the supplied installation video.
Adjust the display angle and secure the fasteners according to the mount instructions.
Check that the assembly is stable and the cables stay clear throughout steering and windshield movement.
The video below shows the crossbar mount assembly. Use it to identify the clamp parts and their fitting order.
If your motorcycle has no suitable crossbar, use another mounting option or have a qualified workshop assess a compatible crossbar.