Use these dimension drawings for the AIO-6 camera mounting bracket and housing when planning an installation.
The dimension labels visible in the drawings are listed below.
Important: The drawings do not state a measurement unit. The values below reproduce the labels exactly, without adding an unconfirmed unit.
Camera bracket: front view
The front view in drawing 1 shows:
Outer circular outline: ⌀29.7.
Inner opening: ⌀23.57.
Opening angle: 93.09°.
Edge detail: 5.49.
Camera bracket: side view
The side view in drawing 2 shows:
Side length: 16.5.
Mounting hole: ⌀4.3.
Camera housing profile
The profile in drawing 3 shows:
Overall profile: 35.92.
Neck label: 7.18.
Transverse section: 11.
Housing angle: 93°.