All CollectionsCHIGEE DisplayQuick Start & Everyday UsePower & WiringPower & WiringSafe power sources, ACC detection10 articlesPower and Test via USB-A to USB-C (Pre-Install)Power a CHIGEE Display with a USB-A to USB-C cable before installation to set it up, update firmware or test it.Introduction to Wiring & Power (CHIGEE Display)What the red, black and yellow wires do, how to find a proper ACC source, and common wiring mistakes to avoid.Power Cable Compatibility (AIO-5 Lite / AIO-5EVO / AIO-6 / XR-2)One power cable works with the AIO-5 Lite, AIO-5 EVO, AIO-6 and XR-2, so you can switch models without rewiring.Battery Protection: Auto Shut-Down Below 12VLocate the ACC Wire with a MultimeterHow to find your motorcycle's ACC (ignition) wire at the fuse box with a multimeter, step by step.Do Not Use BMW 3-Pin Nav Interface for ACCWhy the ACC wire should go to an ACC fuse in the fuse box rather than the BMW 3-pin navigation interface.Connect Yellow ACC Cable Without a Fuse BoxHow to connect the yellow ACC wire to the tail light harness on motorcycles without a fuse box.Continuous Power Consumption: Specs & Standby CurrentPowering CHIGEE Display via Third-Party Power Managers (e.g., HEX ezCAN)Two proven ways to power a CHIGEE Display through a power manager such as HEX ezCAN, and what may stop working.Using ETC or USB Power in Parallel: Requirements
