AIO-5 Lite Black Screen Recovery(Backlight On, But Won’t Boot)
If your AIO-5 Lite shows a backlight when powered on but fails to fully start up, the issue is most likely due to a failed firmware update. In such cases, the system enters a recovery state and cannot complete the boot process.
To resolve this issue, please follow the steps below to recover the device.(available for AIO-5 Lite only)
1. Change the file system of an SD card to FAT32
For Windows PC:
For Mac:
Open Disk Utility, then click your SD card > Erase > Format > MS-DOS (FAT) > Erase
Use long formatting (full formatting) to format the SD card, not quick formatting.
2. Download the file
3. Copy to SD card
Copy the files shown in the image to the root directory of the SD card. Do NOT create any folders on the SD card.
Make sure all firmware files are placed directly in the root directory (i.e., the top level of the SD card).
Placing files in a subfolder will prevent the device from detecting the update.
Ensure the file names are identical.
For AIO-5 Lite:
4. Insert the SD card
With the power off, insert the SD card into the device, then turn the engine on. The screen will remain black for over 2-3 minutes. Afterward, the device will automatically reboot and start up.
After the update, please format the micro-SD card on this device. Failure to do so will require performing the firmware update again each time you power on the device.
★We recommend upgrading your firmware to the latest version using OTA (Over-The-Air) updates. Please refer to the provided link for instructions.
Related Articles
AIO-6 / AIO-5 Play / XR-2 Black Screen Recovery(Backlight On, But Won’t Boot)
If your CHIGEE display shows a backlight when powered on but fails to fully start up, the issue is most likely due to a failed firmware update. In such cases, the system enters a recovery state and cannot complete the boot process. To resolve this ...Screen Lock for Chigee Display
AIO-6 Press and hold the rightmost button (Screen Lock Button) for approximately 3 seconds until you find the prompt “Screen Locked”, then release the button. ⚠️ Please do not hold too long, or the device will restart. AIO-5 Lite Long-press the ...CHIGEE Display Does Not Powering On
CHIGEE Displays support multiple power input methods, depending on the model. If your display is not powering on, follow the steps below to identify and resolve the issue. Step 1: Confirm Power Supply First, provide power to the device using any of ...AIO-5 Play Does Not Require the CHIGEE GO App
The CHIGEE GO App is designed for CHIGEE displays that have camera or LTE (4G) features. The AIO-5 Play series has no camera and does not support adding one, and it has no LTE module—so you do not need the CHIGEE GO App. Applies to: AIO-5 Play ...Can AIO-5 Lite be installed on my bike?
The AIO-5 Lite can be installed on the majority of motorcycles. However, please ensure the following common considerations before making a purchase: 1、Cable Length Check if the cables for the front and rear cameras are long enough. The total cable ...