Fix BSD Warning Displayed on the Opposite Side

Fix BSD Warning Displayed on the Opposite Side

If the BSD warning displays on the opposite side from where vehicles are approaching (e.g., warning on the left when a vehicle is approaching from your right rear), you can troubleshoot using the following steps:

1. Enable Camera Image Mirroring:

Navigate to Video - Video Settings - Mirror

2. Check Camera and Host Interface:

If you have already enabled camera image mirroring function but the BSD display remains reversed, it may be due to incorrect camera and host interface connection. Please try switching the connections.

    • Related Articles

    • Firmware Release Note for AIO-5 Lite

      v3.4.7 2025-11 Added • Added action camera integration, supporting major brands such as GoPro, Insta360, and DJI, including camera wake/sleep control while riding. • Added multi-Bluetooth remote support — allows you to use CGRC LIN together with CGRC ...

    • Fix Parking Monitoring or Anti-Theft Alarm Not Working

      Applies to: CHIGEE Display with dashcam (e.g., AIO-6 LTE, AIO-5 Lite, AIO-5 EVO) 1) Confirm the feature & how it triggers Enable it: Display → Device Recorder → Settings → Parking Monitoring (turn ON). Sensitivity: Set High for testing. Trigger ...

    • Set Up BSD(Blind Spot Detection)

      The Blind Spot Detection (BSD) system is available on the following Chigee Display models: AIO-5 Lite AIO-6 (only when a rear camera is installed) BSD is based on camera visual recognition technology, meaning no additional radar sensors are required. ...

    • Can AIO-5 Lite be installed on my bike?

      The AIO-5 Lite can be installed on the majority of motorcycles. However, please ensure the following common considerations before making a purchase: 1、Cable Length Check if the cables for the front and rear cameras are long enough. The total cable ...

    • AIO-5 Lite Black Screen Recovery(Backlight On, But Won’t Boot)

      If your AIO-5 Lite shows a backlight when powered on but fails to fully start up, the issue is most likely due to a failed firmware update. In such cases, the system enters a recovery state and cannot complete the boot process. To resolve this issue, ...