You can temporarily disable CGRC CAN so the BMW Wonder Wheel no longer controls the CHIGEE Display, then re-enable it when needed—using a 3-second long-press on the middle button of the BMW left turn-signal switch.
Applies to: Bikes using CGRC CAN with BMW handlebar controls (after pairing).
Where: Remote Controller Settings → CGRC CAN → Status → toggle “Long-press to disable.”
Important: This feature requires AIO-6 firmware 1.6.6 or later. In the AIO-5 series, it is supported only on AIO-5 Play and AIO-5 Play for BMW, with firmware 1.8.3 or later.
Setup
Pair CGRC CAN
Go to Remote Controller Settings → CGRC CAN and complete pairing.Enable the feature
In CGRC CAN → Status, turn on “Long-press to disable.”
Use During Riding
Disable CGRC CAN control (mute Wonder Wheel → CHIGEE):
Long-press (~3 s) the middle button on the left turn-signal switch.
→ CGRC CAN disabled; Wonder Wheel won’t control CHIGEE.Re-enable CGRC CAN control:
Long-press (3 seconds) the same middle button again.
→ CGRC CAN enabled; Wonder Wheel control restored.
Notes & Tips
The long-press only affects CGRC CAN → CHIGEE control; BMW instruments work normally.
If the long-press doesn’t respond, confirm the “Long-press to disable” switch is ON and your model and firmware meet the requirements above.
For zero interaction with BMW instruments on certain TFT RT/K models, consider CGRC PRO Remote (Bluetooth) as an alternative control method.