Do Not Use Screw Glue on Wireless Remote Control Pro

Do Not Use Screw Glue on Wireless Remote Control Pro

Reason:

1. Screw glue can cause plastic components to deteriorate and become brittle.
2. This deterioration can lead to damage or malfunction of your remote control.

Note:

1. Using screw glue on your wireless remote control is strongly discouraged.
2. Any damage resulting from the use of screw glue is not covered under warranty.

    • Related Articles

    • Install Wireless Remote Control

      Do Not Use Screw Glue on Wireless Remote Control Pro Operating Wireless Remote Control

    • Operating Wireless Remote Control

      Straightforward guide on how to use the wireless remote control.

    • Unable to Connect iPhone to Chigee Display via Wireless CarPlay

      If your iPhone cannot connect to the Chigee Display using wireless CarPlay, the problem is usually related to Bluetooth/Wi-Fi pairing, iPhone settings, or iOS firmware. How Wireless CarPlay Works CarPlay uses a combination of Bluetooth and Wi-Fi for ...

    • Install CGRC Remote Control CAN

      During setup, all you need to do is plug the CGRC CAN into one of two module interfaces: either the 4-pin port for the RDC module, which handles tire pressure monitoring, or the 8-pin port for the DWA module, which is the bike's anti-theft alarm ...

    • Enable Wi-Fi for Wireless CarPlay

      Yes, to use wireless CarPlay, Wi-Fi needs to be enabled on your iPhone. This allows your iPhone to establish a wireless connection with the CHIGEE Display. And Your iPhone needs to be within Bluetooth range of the CHIGEE Display. You do not need to ...