What are Parking Statistics?
After you turn the bike OFF, the shutdown screen shows Ride Time, Distance, Average Speed, Top Speed.

Most common cause: Incorrect wiring, especially the ACC (yellow) wire not connected to a true ignition-switched 12 V. If ACC isn’t right (or Red is wrongly on ACC), the device can’t detect ride start/stop, so the summary won’t appear or is wrong.

Quick checks

• Red → Battery +12 V (fused 2–3 A)
• Black → Battery − / clean ground
• Yellow (ACC) → 12 V ON / 0 V OFF with ignition

Using a power manager (HEX ezCAN / CANsmart / Thunderbox)? Make sure the channel is ignition-switched with a short off-delay, or wire per the standard method above.

👉 Full, step-by-step guide:
Introduction to Wiring & Power Connection