Harley Fat Boy

One of our Harley Fat Boy owners successfully used the standard bracket(22-32mm diameter tubes) for installation.

• Related Articles

• Harley-Davidson FLHTK 2012

  You can use the provided standard bracket to install the AIO-5 Lite in the position illustrated in the diagram.

• Using the CHIGEE OBD Module: Requirements & Supported Bikes

  Your motorcycle ECU outputs data on the OBD port. The CHIGEE OBD module reads that data and sends it to the CHIGEE Display for live RPM, speed, temps, MAP, etc. Connection rule (non-negotiable): Direct plug-in only. No splitters, no parallel devices, ...

• AIO-5 Lite Black Screen Recovery(Backlight On, But Won’t Boot)

  If your AIO-5 Lite shows a backlight when powered on but fails to fully start up, the issue is most likely due to a failed firmware update. In such cases, the system enters a recovery state and cannot complete the boot process. To resolve this issue, ...

• Manually Update or Downgrade CHIGEE Display (via SD Card)

  What you need A reliable microSD card (8–128 GB recommended). Download the correct firmware package for your model. Important Keep the device powered during the update. Do not power off. Do not rename any firmware files. Copy all files from inside ...

• Fitment & Valve Stems(TPMS): Caliper Clearance + Valve Options

  Why this matters Some motorcycles place the brake caliper very close to the valve stem. With a TPMS sensor installed—especially an external one—this can touch or clip the caliper while the wheel rotates, leading to damage or sudden air loss. Quick ...