Over-the-Air Firmware Update

Over-the-Air Firmware Update

You can update Chigee Display to the latest official firmware or try an early test (beta) firmware. Beta gives you new features sooner but may contain unexpected bugs—even after internal testing.

Steps to Update (Official Firmware)

1. On the main screen, go to Settings → System Update.
2. Tap Check for Updates.
3. Tap Select Wi-Fi (phone hotspot or home Wi-Fi).
4. Enter the Wi-Fi password and connect.
Note: Some rare/special characters in Wi-Fi passwords may not display correctly. If connection fails, change the router password (use common characters) or connect to another Wi-Fi.
If a new firmware is found, tap Download & Install and wait for the process to complete. The device will reboot automatically.

Try the Test (Beta) Version — Optional

⚠️ Beta = early access. Features arrive sooner, but you might encounter unexpected issues.
1. Go to Settings → System Update.
2. In the bottom-right corner, tap Check the Test Version.

Tips & Troubleshooting

  1. ⚠️ Keep the device powered throughout the update (don’t unplug or power off).
  2. If download is slow/stuck: move closer to the router or use a different hotspot.
  3. If install fails: reboot the device, switching to a more stable network connection (such as a mobile hotspot) , and retry. Should the issue persist, we recommend using a different MicroSD card (formatted after insertion) for the firmware download and update process, as the CHIGEE display's built-in eMMC memory does not support OTA updates and requires an external MicroSD card to complete this operation. Click here for video instructions

Important Note

Even for the AIO-6 LTE, the update process uses Wi-Fi only. The built-in IoT SIM card is not used during system updates, so it will not consume any of your SIM card’s data.



    • Related Articles

    • AIO-6 LTE – 4G Module Update Failed

      If your AIO-6 LTE device is showing a 4G module update failure, it is likely due to insufficient power supply during the update process. Why This Happens The 4G module requires more power during firmware updates than some USB debug ports can provide. ...

    • Manually Update or Downgrade CHIGEE Display (via SD Card)

      What you need A reliable microSD card (8–128 GB recommended). Download the correct firmware package for your model. Important Keep the device powered during the update. Do not power off. Do not rename any firmware files. Copy all files from inside ...

    • AIO-5 Lite Black Screen Recovery(Backlight On, But Won’t Boot)

      If your AIO-5 Lite shows a backlight when powered on but fails to fully start up, the issue is most likely due to a failed firmware update. In such cases, the system enters a recovery state and cannot complete the boot process. To resolve this issue, ...

    • External TPMS — Air Leak After Installation (How to Fix)

      Applies to: External tire-pressure sensors — CHIGEE Display TPMS, G3 TPMS Symptoms: Tire loses air / hissing noise / pressure drops soon after installing the sensor. Why Leaks Happen (Most Common Causes) Over-tightening the sensor or anti-theft nut → ...

    • Install CHIGEE Display (Step-by-Step Video)

      We have created an instructional video detailing the installation process. Please enable English subtitles for step-by-step instructions. Additionally, you have the option to use automatic translation for convenience. Installing Handlebar Mount ...