Introduction to CGRC CAN
The Chigee CGRC CAN remote controller works by tapping into your bike's CAN-bus, analyzing the signals from the switches, and translating them into commands to control the CHIGEE Display.
Please note that the Chigee CGRC CAN is specifically designed to work with BMW motorcycles that come equipped with the Wonder Wheel feature. And CGRC-CAN can be paired with AIO-5 and AIO-6 only.
During setup, all you need to do is plug the CGRC CAN into one of two module interfaces: either the 4-pin port for the RDC module, which handles tire pressure monitoring, or the 8-pin port for the DWA module, which is the bike's anti-theft alarm system.
Most BMW motorcycles with the Wonder Wheel typically have both the RDC and DWA modules installed, but their locations can vary across different models. That's why we offer 4-pin and 8-pin connector options for the CGRC-CAN - to ensure straightforward installation tailored to your bike's configuration.
Our online product guides provide general recommendations as a reference point. However, we advise inspecting your specific motorcycle to determine the ideal pin configuration for convenient installation and compatibility with your existing setup.
For instance, while our guide may suggest R1200RT owners get the 8-pin version to connect a DWA module, if upon inspecting your bike you find the 4-pin RDC module is more accessible, opt for the 4-pin CGRC-CAN interface instead.
It's worth noting that some BMW owners may have chosen not to install certain modules during the purchase. Therefore, before buying the CGRC-CAN, we recommend carefully checking the module locations on your motorcycle.
Related Articles
Can I add camera to AIO-5 Play for BMW?
Integrating additional cameras into the AIO-5 Play for BMW is not feasible due to the following reasons: 1. Power Limitations: The AIO-5 Play for BMW is powered through the BMW Nav Prep cradle. While this power supply adequately supports the display, ...Black screen after failed update - AIO-5 Lite & AIO-6 Max/LTE
If the firmware update fails or the device does not boot up, please follow these steps(available for AIO-5 Lite & AIO-6 Max/LTE): 1. Change the file system of an SD card to FAT32 For Windows PC: Use a third party tool like rufus For Mac: Open Disk ...Is the AIO-5 Play BMW version compatible with my BMW?
The AIO-5 Play for BMW is specifically designed for motorcycles equipped with BMW’s Nav Prep 5/6. It connects directly to the Nav Prep cradle and is powered by your BMW’s electrical system — no additional wiring is needed. As long as your motorcycle ...Install CGRC Remote Control CAN
During setup, all you need to do is plug the CGRC CAN into one of two module interfaces: either the 4-pin port for the RDC module, which handles tire pressure monitoring, or the 8-pin port for the DWA module, which is the bike's anti-theft alarm ...Why Does the AIO-5 Play For BMW Display Speed as Even Numbers Only?
The AIO-5 Play for BMW directly reads the original BMW speed data through BMW Nav Prep. However, the original speed values outputted by BMW Nav Prep need to be doubled to reflect the actual speed. After doubling, any whole number will always be an ...