How to install
Do Not Use Screw Glue on Wireless Remote Control Pro
Reason: 1. Screw glue can cause plastic components to deteriorate and become brittle. 2. This deterioration can lead to damage or malfunction of your remote control. Note: 1. Using screw glue on your wireless remote control is strongly discouraged. ...
Avoid Connecting ACC Wire to the BMW 3-Pin Nav Interface
We do not recommend connecting the ACC Wire to the BMW 3-Pin Navigation Interface, as it may cause problems with the entire motorcycle circuit if the ACC encounters any problems. For a safer and more reliable installation, we recommend connecting the ...
How to Connect the Yellow Cable Without a Fuse Box?
If your motorcycle lacks a fuse box, you can connect the yellow cable to the tail light wiring harness instead. The tail light wiring is typically located inside the rear fender, under the seat, or near the tail light assembly. To access the tail ...
How do I locate the ACC wire?
Start by finding the fuse box, then use a multimeter to identify the ACC wire. Set your multimeter to the DC voltage setting. Connect the black meter lead to the battery negative terminal. Use the red meter lead to probe the various wires. The ACC ...
Install Wireless Remote Control
Do Not Use Screw Glue on Wireless Remote Control Pro Operating Wireless Remote Control
Install External Tire Pressure Sensor
Please refer to the attached video for guidance on the installation process. If you need to replace the battery, kindly follow the instructions provided in the following video.
Install External GPS module
Install the GPS with the side marked with the GPS emblem facing upward at a horizontal angle. It can also be mounted on the backside of the cowl (bike shell), but only if there is no metal cover nearby. Note: To prevent a decrease in reception ...
Install CHIGEE Display
We have created an instructional video detailing the installation process. Please enable English subtitles for step-by-step instructions. Additionally, you have the option to use automatic translation for convenience. Installing Handlebar Mount ...
Install MFP0042 Fork Stem Mount
Click below link to know more info. https://www.chigee.com/collections/accessories/products/mfp0042
Install MFP0022 Crossbar Mount
Click below link to know more info. https://www.chigee.com/collections/accessories/products/mfp0022
Install Included Handlebar Mount
Suitable for 22-32mm pipe diameter
Install CGRC Remote Control CAN
During setup, all you need to do is plug the CGRC CAN into one of two module interfaces: either the 4-pin port for the RDC module, which handles tire pressure monitoring, or the 8-pin port for the DWA module, which is the bike's anti-theft alarm ...