You can move one AIO-6 between motorcycles when they use the same quick-release system. The CG and BMW systems use different backplates and do not dock together.
Choose a matching system
The AIO-6 display-side module must match the mount on every motorcycle you plan to use.
Display-side module | Motorcycle-side mount | Compatibility |
CG Quick-Release Base | Does not dock into a BMW Nav Prep cradle | |
Powered BMW Nav Prep cradle for Navigator 5/6 | Does not dock into a CG Quick-Release Base |
Use CG mounts on two or more motorcycles
The CG Quick-Release Module package includes one motorcycle-side CG base and power cable. Fit a CG Quick-Release Kit with an extra base and power cable to each additional motorcycle.
Motorcycles using CG bases | AIO-6 displays | Parts to buy |
2 | 1 | 1 CG Quick-Release Module package and 1 extra CG Quick-Release Kit |
3 | 1 | 1 CG Quick-Release Module package and 2 extra CG Quick-Release Kits |
Press the CG base latch.
Remove the AIO-6 from the first motorcycle.
Dock the AIO-6 into the next motorcycle’s CG base until it clicks into place.
Use BMW Nav Prep cradles on two or more motorcycles
Fit one BMW Quick-Release Module to your AIO-6. Each motorcycle needs its own installed, powered BMW Nav Prep cradle for Navigator 5/6. One AIO-6 can move between two or three compatible cradles.
Operate the release on the BMW Nav Prep cradle.
Remove the AIO-6 from the first cradle.
Dock the AIO-6 into the next motorcycle’s BMW Nav Prep cradle.
Use a mixed BMW and CG setup
For one motorcycle with a BMW Nav Prep cradle and another without one, choose one of these configurations.
Configuration | Parts needed | AIO-6 displays |
Use CG bases on both motorcycles | Set aside or remove the BMW cradle and fit a CG base on both motorcycles; buy 1 CG Quick-Release Module package and 1 extra CG Quick-Release Kit | 1 |
Keep the BMW cradle and the CG base | Fit a BMW Quick-Release Module to one AIO-6 and a CG Quick-Release Module to the other | 2 |
The BMW and CG backplates cannot be mixed or used at the same time on one display. Changing systems requires removing and reinstalling the display backplate with screws.
Important: Although changing backplates is technically possible, frequent changes can strip screw holes, loosen or damage mounting points, and reduce durability. Keep each display configured for one system to preserve mounting integrity and water resistance.
The BMW Quick-Release Module installation video shows the backplate installation. Follow the module’s installation guide when fitting it.
Add motorcycle data or Wonder Wheel control
Optional data and control accessories do not change which quick-release mounts fit your AIO-6.
CGRC LIN can provide supported BMW data and Wonder Wheel control. Check the CGRC LIN model and year compatibility before buying; available data depends on the motorcycle.
CGRC CAN provides Wonder Wheel control only on compatible BMW motorcycles.
The CHIGEE OBD Module requires a motorcycle that supports ISO 15765-4 CAN and the correct adapter cable. Check motorcycle compatibility before buying.