If your AIO-5 Lite shows no GPS signal or a GPS error, follow the steps below to identify and resolve the issue.
Step 1: Check Installation
Do not install the GPS module under carbon fiber or behind metal surfaces.
Ensure the TOP side of the module faces the sky.
Keep the module away from the main unit, camera, and wiring to avoid interference.
Use 3M adhesive to secure the module inside the motorcycle shell, with the TOP side facing upward.
Step 2: Confirm Environment
Perform the satellite search outdoors in an open area. Indoor use will block the GPS signal.
Depending on weather conditions, initial satellite acquisition may take 3–10 minutes. This is normal.
Step 3: Evaluate Signal Behavior
Cold Start: If the device has been powered off for more than 30 minutes, a new satellite search is required (3–10 minutes).
Hot Start: If restarted within 30 minutes, the device should connect much faster using saved satellite data.
Step 4: When to Request a Replacement
If you have:
Installed the GPS module correctly,
Tested the device in an open outdoor location,
Waited for the normal acquisition time,
…but the module still cannot acquire a GPS signal, please contact us to request a replacement GPS module.