Mount the CGRC Pro wireless remote control (SKU: MFP0089) on your motorcycle handlebar with the included bracket, then pair it with your CHIGEE Display.
Mount the CGRC Pro
Use the bracket and fasteners supplied with the CGRC Pro. Choose the mounting holes for your preferred button position:
To position the buttons below the handlebar, align the bracket with the front two holes on the remote control.
To position the buttons above the handlebar, align the bracket with the two elongated holes.
Align the selected holes and secure the remote control to the bracket with the supplied screws using the supplied hex key.
Clamp the bracket to the motorcycle handlebar and tighten the clamp fasteners. Check that the remote control is secure and that you can reach its buttons.
The video below shows how to mount the CGRC Pro.
Pair the CGRC Pro with your CHIGEE Display
Pair the CGRC Pro from the remote control settings on your CHIGEE Display.
Go to Settings > Devices > Remote Control.
Tap Pairing.
Press any button on the CGRC Pro.
Wait for the blue indicator light to flash and the pairing process to complete.
If the pairing time expires, repeat the steps above.
Charge the CGRC Pro
Charge the CGRC Pro when your CHIGEE Display shows a low-battery message for the remote control.
Connect a USB-A to USB-C cable to the CGRC Pro.
Wait for the red charging indicator to turn off.
If the CGRC Pro does not work or the indicator does not turn on, try charging it. If pairing fails, repeat the pairing steps.