Can CGRC CAN support vertical scrolling?
While the scroll wheel allows side-to-side operation, it does not support vertical scrolling. Please note that this is not a product defect as the CGRC CAN does not have a vertical scrolling feature.
To better understand how to operate the CGRC CAN, please refer to the following videos and manual:
Related Articles
Does it support portrait/vertical screen mode?
No, the AIO-5 Lite does not currently support a portrait/vertical screen mode. The device is designed to display content in landscape mode only.Can CGRC CAN be Daisy-Chained?(e.g. Hex ezcan)
Yes, CGRC CAN supports daisy-chaining ezCAN: Remove the male connector from the DWA (the stock plugs into the DWA on the bike) attached to the ezCAN, and fit the Chigee connectors between them (female Chigee to bike's male and male Chigee to ezCAN ...Introduction to CGRC CAN
The Chigee CGRC CAN remote controller works by tapping into your bike's CAN-bus, analyzing the signals from the switches, and translating them into commands to control the AIO-5 Lite. Please note that the Chigee CGRC CAN is specifically designed to ...Install CGRC Remote Control CAN
During setup, all you need to do is plug the CGRC CAN into one of two module interfaces: either the 4-pin port for the RDC module, which handles tire pressure monitoring, or the 8-pin port for the DWA module, which is the bike's anti-theft alarm ...Can I Use CGRC CAN and Denali Cansmart Together?
Yes, you can use the CGRC CAN and Denali CanSmart together. Simply connect them in a series as follows: OEM Connector → Chigee CGRC CAN → Denali CanSmart Controller → RDC/DWA Module Connector All you need to do is connect the interfaces in the ...