The MFP0042 fork stem mount is designed for a compatible 12–29 mm fork-stem mounting hole. It is not compatible with hexagonal holes, according to the MFP0042 product information. Check the hole shape as well as its diameter.
Prepare and fit the mount
You need the MFP0042 mounting kit, a compatible CHIGEE Display mounting interface and tools matched to the supplied fasteners. Check cockpit clearance before fitting.
Measure the fork-stem mounting hole and confirm that its shape is supported.
Check that the opening is accessible and that the proposed display position clears the instruments, tank and controls.
Follow the installation video below to assemble and secure the mount with its supplied parts. Do not substitute a guessed tightening torque.
Attach the display and adjust its position.
Turn the handlebars fully left and right, then check that the mount is secure and the cables do not pull.
The video shows the MFP0042 fitting procedure. Use it for the assembly sequence and fastener positions.
If the mount cannot be secured in your fork stem, use another compatible mounting option instead of forcing it.