Parking monitoring wakes your CHIGEE Display and records video when it detects vibration after you turn off the ignition. The display needs time to wake before recording begins.
This feature requires installed cameras, including on the AIO-6. It is also available on camera-equipped models such as the AIO-5 Lite, AIO-5 EVO and XR-2.
Turn on parking monitoring
Check the battery positive, battery negative and switched ACC connections against your model's installation instructions.
Open the dashcam view on the CHIGEE Display and tap the video area.
Open the dashcam settings and turn on Parking Monitor.
Choose the sensor sensitivity, then turn off the ignition to test parking monitoring.
Receive alerts on the AIO-6 LTE
AIO-6 LTE vibration notifications require both camera parking monitoring and the App's vibration alert setting to be enabled. Without a camera, the AIO-6 LTE cannot send vibration notifications.
The LTE service must be active, the network available and battery voltage above the protection threshold. See AIO-6 LTE vibration notification troubleshooting.
Check recordings and power
After a parking event, the display shows a notification about new parking video when you start the motorcycle. Review and save any footage you need.
Low-voltage protection can stop parking monitoring to reduce battery drain. Turn off parking monitoring during transport to avoid repeated vibration-triggered wake-ups.
The illustration below accompanies the parking monitoring setup.