Camera Hardware & Setup
Dust Caps for Unused Camera Cables
Chigee does not provide or sell dust caps or protective plugs for unused camera cables. If you are not connecting a camera immediately (for example, when using the quick-release kit without installing the camera), we recommend that you: Purchase ...
Use Rear Camera Only (No Front Camera)
Yes, you can use the Chigee Display with only the rear camera connected. Simply plug in the rear camera cable, and it will function normally. Follow the guidelines below to ensure proper setup: 1. Cable Connection The cable labeled “cam b” must be ...
Fix “Not Connected” After Wiring (AIO-6 Camera)
If your AIO-6 Camera displays “Not Connected” even after wiring is complete: Tighten the Type-C Harness Screws 1. On the side of the Quick-Release Module unit, locate the Type-C wiring harness. 2. Ensure the screws are fully tightened. Based on our ...
Camera Malfunction on CHIGEE Dashcam: Troubleshooting
If a camera connected to the Chigee dashcam does not start or shows no image, please review the following information to understand the possible causes and troubleshooting steps. Symptoms of Camera Malfunction The camera does not power on. The ...
Camera Cable Lengths (Front and Rear)
The total cable lengths are as follows: Front camera: 158cm Rear camera: 313cm The camera cables at the main unit are as follows: Front camera: 58cm Rear camera: 58cm The camera cables included with the cameras themselves are: Front camera: 100cm ...
Adjust Camera View Angle After Installation
Even after installation, you can fine-tune the camera's perspective by loosening the lens screws. If you need to adjust display angle of the main unit, simply loosen the bracket screws for quick adjustments.
Adjust Camera Image When Installed Upside Down
The software settings do not support a 180-degree screen rotation. However, both the front and rear cameras are designed to support a 360-degree rotation feature. During installation, you can rotate the camera lens itself to achieve the desired ...
Flip the Camera Image Horizontally (Mirror)
Both the front and rear cameras support left-right mirroring. You can easily enable this feature in the settings to flip the image horizontally as needed.