Use CarLink settings to choose the phone-mirroring layout on your CHIGEE Display. Fusion Mode and High Frame Rate are separate options with different availability.
Choose Fusion Mode or full screen
Fusion Mode places phone navigation beside the CHIGEE camera view and ride data on AIO-5 Lite, AIO-5 EVO, AIO-6 Max and AIO-6 LTE. Full-screen CarPlay or Android Auto is unavailable while Fusion Mode is on.
Open CarLink from the display’s home screen.
Tap the settings icon and find Fusion Mode.
Turn it on for the split view or off for full-screen phone mirroring.
Reconnect the phone and check the layout.
If CarLink opens phone mirroring immediately, temporarily disconnect the phone’s Bluetooth and Wi-Fi, change the setting, then turn them back on and reconnect.
Fusion Mode layout showing the navigation and side-panel arrangement.
The video below demonstrates the Fusion Mode layout and switching procedure.
What the side panel supports
The side panel is for the CHIGEE camera interface and bike data. It does not display the action-camera control interface, and its layout cannot be customized.
Enable High Frame Rate
If your CarLink settings include High Frame Rate, turn off Use 2.4G AP before enabling it. This controls phone mirroring, not dashcam recording frame rate.
Open CarLink settings.
Select Setting.
Turn off Use 2.4G AP.
Turn on High Frame Rate and reconnect phone mirroring to check the result.
CarLink high-frame-rate settings reference.
If a setting is unavailable
If High Frame Rate is absent from your CHIGEE Display, check the firmware and instructions for your exact model and regional version. The Fusion Mode model list above does not define High Frame Rate availability.
If CarLink opens phone mirroring immediately, temporarily disconnect the phone’s Bluetooth and Wi-Fi to access the settings. Turn both back on and reconnect after making the change.