A BMW Nav Prep cradle can power the AIO-6 and cameras while riding. Parking monitoring needs the correct battery and ACC wiring so power remains available after ignition-off.
Check the power requirements by model
This table applies to an AIO-6 fitted to a BMW Nav Prep cradle with the matching BMW Quick-Release Module and compatible cameras.
Model and wiring | While motorcycle power is on | After ignition-off |
AIO-6 LTE with cradle power only | The display and cameras work; 4G and live view can work with valid data/service and coverage | No parked remote camera access, Parking Monitor or App vibration alerts when constant battery power is unavailable |
AIO-6 Max with cradle power only | The display, camera recording and supported on-device functions work | No Parking Monitor when constant battery power is unavailable |
AIO-6 with correct battery and ACC wiring | Normal powered operation | Parking Monitor can work with cameras and the correct settings; LTE remote features also require valid data/service, coverage and voltage above the protection threshold |
Connect power for parking features
Use the power cable supplied for your AIO-6 or quick-release installation.
Follow the installation guide to connect battery positive, battery negative and ignition-switched ACC.
Check that constant battery power remains available after ignition-off.
Enable Parking Monitor and test a parked recording; for LTE notifications, also enable the App alert and check mobile service.
See the CHIGEE Display installation guide and the BMW Quick-Release Module and camera installation video.
If you only need AIO-6 Max recording while riding, the powered BMW cradle can be sufficient. Add battery and ACC wiring when you need Parking Monitor. For LTE parked alerts, see vibration notification setup and troubleshooting.