BMW Native TPMS Data Not Showing on CHIGEE Display

BMW Native TPMS Data Not Showing on CHIGEE Display

Applies to:
  1. AIO-5 Play for BMW plugged directly into BMW Nav Prep
  2. AIO-6 with BMW Quick-Release Module plugged into BMW Nav Prep
If your CHIGEE Display isn’t showing TPMS data, follow the steps below:

1. Check Physical Connections

Start by ensuring all connection points are clean and secure:

  • Remove the CHIGEE Display from the cradle

  • Inspect and clean the following in this order:
    – The contact points on the back of the main unit
    – The BMW Nav Prep metal contacts
    – The 3-pin male connector on your motorcycle
    – The 3-pin female connector on the BMW Nav Prep cradle

  • Reattach the CHIGEE Display securely and ensure it sits firmly in the cradle

2. Verify TPMS Settings in the Device

  • On the CHIGEE Display, go to: Settings > Features > TPMS

  • In the upper right corner, check the selected data source

  • Make sure “Nav” is selected — this allows the device to use BMW’s factory TPMS data via the Nav Prep connection

3. Important Notes on Compatibility

If you've completed all steps above and:

  • TPMS data is still not showing,

  • But other data such as speed, gear, or fuel is displayed correctly —

This likely means one of the following:

  • Your BMW does not have factory-installed TPMS sensors, or

  • Your BMW does not output TPMS data through the Nav Prep system (this is common with certain models like the BMW R1200 GS)

If you're unsure whether your model supports TPMS output, we recommend checking your BMW’s specifications or consulting your local dealer.

    • Related Articles

    • Compatibility of Chigee Display with BMW Cradle(AIO-5 Play BMW & AIO-6)

      Chigee offers two products that can be powered directly through the BMW Nav Prep 5/6 or the BMW ConnectedRide Electric Keyless Mount. Depending on your BMW motorcycle’s model and year, the Chigee Display can: Receive power directly from the cradle ...

    • BMW Tire Pressure Data Integration with Chigee Display

      Supported Scenarios Chigee Displays can directly access your BMW’s built-in Tire Pressure Monitoring System (TPMS) through the BMW 3-pin navigation connector in the following setups: AIO-5 Play for BMW plugged directly into BMW Nav Prep AIO-6 with ...

    • Lean Angle, RPM, or Other BMW Data Not Displayed on the CHIGEE Display

      If you notice that the lean angle, engine RPM, speed, or other BMW data is missing from the CHIGEE Display’s professional dashboard interface, this article will explain the reasons and what you should know. Data Source of the Professional Dashboard ...

    • Why the Chigee Display Shows Only Even Speed Values on BMW Nav Prep

      The AIO-5 Play For BMW and the AIO-6 with BMW Quick Release Module rely on the BMW Nav Prep cradle to provide both power and vehicle data. Why Only Even Numbers? BMW Nav Prep outputs speed data in a format where the values must be doubled to reflect ...

    • Solution: BMW Data Reading Issues

      BMW data reading relies on the BMW Nav interface transmitting ECU data to the CHIGEE Display. If the CHIGEE Display powers on or responds to Wonderwheel control but fails to read data, this usually indicates an issue with your BMW ECU or Nav Prep, ...