How to Enable High Frame Rate？

To enable high frame rate on your AIO-5, please follow these steps:

1. Go to Carlink settings.

2. Select Setting.

3. Turn off the option "Use 2.4G AP".

You can refer to the attached images for detailed instructions：

• Related Articles

• Black screen after failed update - AIO-5 Lite

  Black screen after failed update - AIO-5 Play If the firmware update fails or the device does not boot up, please follow these steps(available for AIO-5 Lite): 1. Change the file system of an SD card to FAT32 For Windows PC: Use a third party tool ...

• Is the AIO-5 Play BMW version compatible with my BMW?

  The AIO-5 Play for BMW is specifically designed for motorcycles equipped with BMW’s Nav Prep 5/6. It connects directly to the Nav Prep cradle and is powered by your BMW’s electrical system — no additional wiring is needed. As long as your motorcycle ...

• Can I add camera to AIO-5 Play for BMW?

  Integrating additional cameras into the AIO-5 Play for BMW is not feasible due to the following reasons: 1. Power Limitations: The AIO-5 Play for BMW is powered through the BMW Nav Prep cradle. While this power supply adequately supports the display, ...

• Why Does the AIO-5 Play For BMW Display Speed as Even Numbers Only?

  The AIO-5 Play for BMW directly reads the original BMW speed data through BMW Nav Prep. However, the original speed values outputted by BMW Nav Prep need to be doubled to reflect the actual speed. After doubling, any whole number will always be an ...

• Can AIO-5 Lite be installed on my bike?

  The AIO-5 Lite can be installed on the majority of motorcycles. However, please ensure the following common considerations before making a purchase: 1、Cable Length Check if the cables for the front and rear cameras are long enough. The total cable ...