Skip to main content

Enable high frame rate on your CHIGEE Display

Turn off 2.4 GHz AP mode and enable the high-frame-rate option in a supported CarLink settings interface.

If your CarLink settings include High Frame Rate, turn off Use 2.4G AP before enabling it. This controls phone mirroring, not dashcam recording frame rate.

Change the setting

  1. Open CarLink settings.

  2. Select Setting.

  3. Turn off Use 2.4G AP.

  4. Turn on High Frame Rate and reconnect phone mirroring to check the result.

CarLink high-frame-rate settings reference.

CarLink high-frame-rate settings reference.

If the option is absent, check the firmware and instructions for your model. Do not assume the illustrated setting is available on every regional version.

Did this answer your question?

Related Articles