A CHIGEE Display may stay on after ignition-off because the BMW motorcycle delays cutting power to its navigation cradle. The delay depends on the motorcycle and installation; there is no single shutdown time for every setup.
Try these fixes first
While parked, record the CHIGEE Display’s shutdown behavior:
Note the time between ignition-off and display shutdown.
Check whether a shutdown countdown appears.
Identify whether the display uses only the BMW cradle or also has a camera harness, power harness or other accessories.
Important: If the display stays on beyond your motorcycle’s normal shutdown behavior, do not leave the setup powered unattended. Contact us to check the cause.
If the problem continues
The CHIGEE Display’s power path determines which parts need checking. The symptom alone does not identify a faulty component.
Power comes only from the BMW cradle
For a cradle-only installation, check the cradle, contacts, motorcycle power management and display behavior. Use the BMW cradle identification guide or the BMW setup guide if you are unsure which connection you have.
An extra harness is connected
Have additional camera or power wiring checked against the approved diagram for that exact product. Do not change wiring based on a generic diagram.
Parking or standby features are enabled
For setups with parking or standby features, report which features are enabled and which harness supplies power. A dark screen does not show that every connected module has stopped drawing power.
Contact us
If the shutdown behavior is longer than normal or the display continues to stay on, contact us with your BMW model and year, CHIGEE Display model and firmware, cradle type, observed shutdown time and accessible wiring photos.
Include the countdown behavior, extra harnesses and enabled parking or standby features. We’ll review the installation before recommending a replacement.