XR-1 parking monitoring uses approximately 350 μA in standby. Low-voltage protection shuts the system off when your motorcycle battery drops below 11.8 V to prevent further drain from the XR-1.
Understand the battery protection
The 350 μA figure describes XR-1 standby consumption, not the power used while the cameras are recording. Parking monitoring needs a constant battery connection and stops when low-voltage protection shuts the system off.
The cutoff helps limit battery drain; it is not a guarantee that every motorcycle battery will start the engine after prolonged parking.
See Set up parking monitoring on the XR-1 for the wiring requirements and settings.