Does the XR-1 Start Recording Automatically? | CHIGEE Support

XR-1 Auto-Start: No Manual Action Needed

This article applies to the CHIGEE XR-1 dash cam.
Do I need to turn on the XR-1 whenever I'm going for a ride?
No need! Your XR-1 automatically starts recording as soon as you turn on your motorcycle's ignition. There is nothing to press and nothing to remember — if your motorcycle is running, your XR-1 is recording.
Additionally, even after you park and turn off the ignition, the XR-1 continues to monitor your surroundings through Parking Monitor. This mode automatically triggers recording when motion, vibration, or impact is detected — helping protect your bike even while parked.

    • Related Articles

    • XR-1 Dash Cam Quick Start Guide: Installation, Footage Viewing & Optional Upgrade

      The CHIGEE XR-1 is a screenless smart motorcycle dash cam that records front and rear footage automatically every time you ride. Because it has no screen of its own, you set it up once, tuck it out of sight, and manage everything through the CHIGEE ...

    • XR-1 Dash Cam Cannot Be Manually Turned Off

      This article applies to the CHIGEE XR-1 dash cam. The XR-1 is designed to start recording automatically whenever it is powered on, and to keep recording as long as it has power. There is no setting to permanently turn off recording — not on the ...

    • XR-1 Loop Recording: Always On by Design (File Safety Explained)

      This article applies to the CHIGEE XR-1 dash cam. Your XR-1 is designed to record continuously without interruption. To achieve this, it uses loop recording, which ensures you always capture the latest footage without worrying about storage running ...

    • How to Access Locked Videos on the XR-1 Dash Cam

      This article applies to the CHIGEE XR-1 dash cam. Your XR-1 protects locked videos — whether locked automatically by Collision Lock or manually by you — from being overwritten by loop recording. Since the XR-1 has no screen, there are two ways to ...

    • XR-1 Over-the-Air Firmware Update

      The XR-1 dash cam updates its firmware through the CHIGEE GO app on your phone. Because the XR-1 has no screen, there is no on-device update option—everything is done from the app. You can install the latest official firmware, or opt into an early ...