TPMS
Why are there discrepancies between CHIGEE TPMS data and the BMW TPMS data?
If you notice that CHIGEE TPMS consistently shows slightly higher pressure readings than BMW's factory system. This discrepancy is normal. System Comparison BMW Factory TPMS: Static Measurement BMW's factory TPMS uses an internal sensor system that: ...
One of the Tire Pressure Sensors is Not Working
If one of your tire pressure sensors is not functioning correctly or is not pairing properly, please follow these troubleshooting steps: 1. Switch the positions of the front and rear sensors and try pairing them again to see if this resolves the ...
Tire Pressure Sensor Compatibility Notice
Due to differences in brake caliper configurations, some bike models are not compatible with our tire pressure sensors. 2024/9/3 update Worried about your CHIGEE TPMS being caught by the brake caliper? CHIGEE introduces an exclusive tire valve stem ...
Customized Pressure Alerts for Each Sensor on AIO-5?
2024-7-14 update: You can now set individual tire pressure thresholds for front and rear tires. This enhancement allows for more precise tire pressure monitoring tailored to your specific needs. To access this feature, please update your device to ...
Is there an option to disable the TPMS Alert?
Currently, it is not possible to turn off the audible tire pressure warning from the display unit. However, we plan to introduce an option to toggle the audio alert in a future over-the-air (OTA) update. You can look forward to having the ability to ...
Why does TPMS data change significantly after a period of rest and then riding?
When the motorcycle is stationary, the tire pressure data reflects the last state from the previous ride, with relatively high temperature and pressure. However, after a period of rest, when riding begins again, the pressure and temperature haven't ...
Why is there a high deviation in TPMS data between riding and parking?
When riding, the increase in tire temperature causes the air pressure to rise. Conversely, when stopping, the temperature decreases, leading to lower air pressure.
How do I set TPMS alarm values, and what values should I set?
Refer to your bike's user manual for guidance on setting tire pressure alarms. The high pressure alarm should be set at 20-25% over your normal tire pressure and the low pressure alarm should be set at 10% below your normal tire pressure.
Which tire pressure units are supported?
Our system supports tire pressure units in PSI and Bar.
Why is the rear tire sensor showing higher temp than the front tire?
The rear tire sensor is consistently influenced by the heat from the engine and exhaust during motorcycle rides. This causes the temperature around the rear tire to be higher compared to the front tire, resulting in the observed temperature ...
Why is there a discrepancy in TPMS readings?
If you use another tire pressure monitoring tool to check tire pressure while your bike is stationary, the data obtained at that moment may differ from the readings detected by the AIO-5. The discrepancy arises because the AIO-5 captures data prior ...
Can TPMS support three tires?
The standard package for our MFP0019 Tire Pressure Sensors includes two sensors. Currently, our system supports a maximum of two tire connections. Unfortunately, it cannot accommodate three tires simultaneously.
Can the battery of the tire pressure sensor be replaced?
MFP0018 Internal Sensors: Not replaceable; after battery depletion, a new internal sensor needs to be purchased. The battery life is approximately 2-3 year, but may vary based on tire pressure check frequency. MFP0019 External Sensors: Yes, when the ...